Open the map

Home › Useful info › Avoiding bridge strikes

How to avoid a bridge strike: 7 checks before you set off

By Zydrunas Likas, Class 1 driver and founder of CabBuddy · 6 November 2026

Most bridge strikes don't happen because a driver is careless. They happen because a driver didn't know: the real height of the load, the bridge on the diversion, or that the sat nav was set up for a van.

🚨 Network Rail recorded 1,666 bridge strikes between April 2024 and March 2025. That's about one every five hours, and more than the year before.

Nine years ago, on my first UK job, they gave me the keys and a 15'3" trailer, with no instructions. Then I saw the signs for a 15 ft bridge on the A5 in Hinckley. My company was before the bridge, but those signs scared me. I was new in the UK and used to metres, so signs in feet and inches were alien to me. I wish there was an app like CabBuddy back then. I've never forgotten that feeling. These are the checks I do now, every shift.

1Know your real height, every time

Your height is not "the truck". It's the truck plus the trailer plus the load, and it changes from job to job.

💡 Swapped trailer? Check the height again before you move.

2Put the height in the cab, where you can see it

If your vehicle's travelling height is over 3 metres, the maximum height must be shown in the cab, where the driver can see it. Driving without it is an offence, according to the government's bridge strike guidance for drivers. Show it in feet and inches and in metres, because older UK bridge signs only show feet and inches.

3Plan with a truck route, not a car app

Normal sat navs and car map apps don't know your height. They'll happily send a lorry under a 12 ft bridge. Use a truck sat nav with your real height entered, or plan the route on a truck map first.

On CabBuddy's free low bridge map, you put your height in once and every low bridge turns red (too low), amber (1 inch or less to spare) or green (clears you). The route planner checks every bridge on the way.

4Check diversions and unfamiliar drops

Lots of strikes happen off the planned route: a road closure, a missed turn, a new delivery address down a side street. Before you follow a diversion sign or turn off into an area you don't know, stop somewhere safe and check the bridges ahead.

5Read the bridge signs properly

6Watch for anything that changes the clearance

New road surfacing can take an inch or more off the headroom, and maps and signs aren't always updated straight away. If the road looks freshly resurfaced and you're close to the limit, treat the bridge as lower than the sign.

7If in doubt, don't go

Never "give it a go". If you're not sure you'll clear it, stop safely before the bridge, put your hazards on and work out another way. Ask your transport office for help. A late delivery is nothing compared to a strike.

⚠️ If you do hit a bridge
  • Stop as soon as it's safe, and put your hazards on.
  • If anyone is hurt, or the road or railway could be blocked or damaged, call 999.
  • For a railway bridge, call the number on the bridge's identification plate so trains can be stopped and the bridge checked.
  • Tell your transport office straight away.

Drivers who hit bridges can be prosecuted, and the traffic commissioner can take action against their licence.

Check your route now

CabBuddy is free, made by a lorry driver, and needs no sign-up. Enter your height, and every low bridge near you or on your route shows up.

Open the free low bridge map

Sources: Network Rail: a vehicle hits a rail bridge every five hours · Network Rail: Wise Up, Size Up · GOV.UK: Prevention of bridge strikes, a good practice guide for professional drivers. This is general guidance, not legal advice. Always follow road signs.